Custom Swimming Pool Liners
Yukon, Mustang, Moore, Edmond, Piedmont Oklahoma
A-Pro Services offers high quality, American made in-ground vinyl swimming pool liners and installation in central Oklahoma, including Edmond, Piedmont, Yukon, Mustang, Moore, Del City and Midwest City
(Click to call)
Mobile Friendly Full Site
From the first time you contact us about replacing your in-ground vinyl swimming pool liner, we want your experience to be a great one! For those who have never been through the process, it's important to know what to expect, so we have pages that take you through it all, from your first phone call, to the final installation. If you're struggling with where to begin, here are a couple links on our main website that might help, or, read on!
Just like cars, and most other things, there are a lot of brands to choose from out there, with different quality levels and specifications. While we can get just about any brand liner that you could name, we have the privilege to work directly with some of the best manufacturers in the world. We chose to feature American made liners, like Loop-Loc, GLI, and Plastimayd, because I would rather help pay wages and benefits to a factory worker in Ohio, or a designer in Oregon than to underpay a worker halfway around the world. Even today, American factories are held to higher standards, environmental responsibility, and wages. Of course, that does mean their products cost more to make. We offset this cost with our ability to purchase liners directly from the manufacturers instead of going through a distributor, which also gives us much more reliable shipping, quality, and response times. Each liner is custom crafted by American workers, specifically to fit your pool.
Because it's not just any liner. It's Your Liner!
Quality of the liner - don't go cheap, you will pay for it!
Proper fit - The liner should fit snugly in corners and radiuses, and have a slight vertical tension.
The condition and preparation of the structure - It must be clean, smooth, and free of rust, all gaskets and faceplates should be replaced
. Taking the time to properly install the liner - It should be installed so that it is well fitted in the corners, and adjusted so that there is even stretch throughout the liner. It should be wrinkle free.
Lastly, and just as importantly, the care the liner receives after it is installed. Water chemistry and proper care are critical.
Empty pool with liner held in place by vacuum
Once the pool has been precisely measured, it usually takes 2-3 weeks for your custom liner to be manufactured and shipped. During this time, any major repairs to the pool structure can be made, and preliminary cleaning and preparation done. At our first meeting, we will be able to give you an approximate ship date for your liner, and follow up when there is a ship confirmation. Liner installation should be scheduled accordingly. If the pool is still in use, it should be drained a day or two before the installation date, and prepared for the new liner.
On the day of installation, the pool gets a final cleaning and inspection, and the new gaskets are installed. The liner is placed in the pool according to the way it was folded by the manufacturer, then unfolded and snapped into the bead receiver. It is then adjusted so that it hangs straight and even, and that all the checkpoints, such as corners and breakpoints are lined up. If there are vinyl covered steps, they are attached first, from the bottom step up, often using "pocket rods" to hold the back of the tread tight to the riser. If the liner is to attach to a plastic stair insert, it is usually temporarily weighted to hold the liner tightly to the wall.
The installer then places a strong vacuum, designed specifically for installation of swimming pool liners, between the wall and liner, and vacuums the liner into place. After a short time, the liner should be conformed perfectly to the shape of the pool, except for perhaps a small strip along the bottom of the wall.
Choosing an In-Ground Liner shouldn't be too difficult, really, although I occasionally have had a customer or two who made it hard on themselves. Of Course, you want something that looks nice, and generally doesn't clash with the house and decor of the yard, but much more important is the quality of the liner, and it's proper fit. There is the matter of thickness, step options, UV treatment, bead type, and other considerations. There are lots of patterns out there, some of them pretty stunning, but be aware that sometimes, specific pattern pattern can cost extra.
So I say first of all, for quality and other reasons, Buy American! Let A-Pro Services help you choose the best pattern for your taste and budget. There's a lot more info about choosing new pool liner at this page:
How do you know that the swimming pool liner installer that you are considering hiring is the right one? First, do a little research. A-Pro Services is a highly reputed and trustworthy company, but how do you, the consumer, verify our reputation? You can't just take our word for it, because, here in Oklahoma, every time a storm comes along, there are roofing, fencing, and, yes, pool companies that spring up from out of state, make the fast buck and disappear. You want a company that has been here a while, and who has a good reputation. To check out A-Pro Services, you can click the BBB logo, or the "Our Reputation" link on any page.
For more about checking out an installer in general, here's our page:
"When You Want it done right...
Since Your new liner is a significant expense, it's important to know how to make it last as long as possible. While there are a lot of variables that effect how long a pool liner will last, there are some basic things a homeowner can do to preserve and protect it. Most are fairly obvious, but for the beginner, this page will help to give you the basic idea, and of course, when we install your new liner, we will give you all the paperwork, which usually includes the guide from manufacturer containing tips on care and maintenance of their product. For some tips on vinyl liner care, visit our page:
Just like the first time driving a car - especially if it was a stick
shift, swimming pool care and water chemistry can seem a bit confusing, at
first, but with a little practice, and a firm grip of the concept, pretty soon,
it just becomes second nature.
There are 4 major components to Swimming pool water care: Sanitation, Corrosiveness, Cleanliness, and Clarity. Only if the pool water is in proper chemical balance, can the the filtration system effectively take care of the other two. While there a lot of possible complications to swimming pool chemistry, the average homeowner just needs to know the basics - the rest can be learned on a "need to know" basis. We'll cover those basics of pool chemistry here, and A-Pro Services will be happy to help with all the rest.
To learn a little about basic pool chemistry, Check out our page about:
There are three major basic types of Above Ground Liners. Overlap, Beaded, and J-hung. Generally, if you have a flat bottomed pool, you can use either type. with some considerations. Until fairly recently, the most common has been the overlap. They are generally cheaper, but are more work to install. Since there is no defined water line, they usually do not have a pattern at the top unless it is an overall pattern. Beaded and J-hung liners usually have a tile pattern, or some other decoration, around the top of the liner, because the point where the liner is attached to the pool wall is absolutely defined.
If your pool previously had an overlap liner, you can usually change to the other types, as long as the pool has a flat bottom, and a proper cove at the bottom of the wall. No modification is required to install a J-Hung liner, but you still have to remove the top rails and stabilizer rails to install it - all at once. In Oklahoma, you need to have plenty of help, because the pool is very vulnerable in the wind without top rails. A better choice, if you are installing the liner yourself with limited help, is to install a bead receiver, and use a beaded liner. You only have to take the top rails and stabilizer rails off once, and not all at once. The next time the liner is replaced, you don't even have to take the top rails off at all! This is, by far, the easiest to install, if you already have the receiver in place.
If you have any deep area in the pool at all, you are pretty much confined to a custom liner, or more commonly, an expandable liner, which, by nature, are overlap liners, which are stretched into place.
As I mentioned above, there are three basic types of above ground liners: Overlap, J-hung, and Beaded. There also "unibead" liners which can be installed either as j-hung or V-bead. The type of liner being installed determines how it is installed, so if you are not sure which type you have refer to the Above Ground Liner page (above) to learn more about types of above ground liners.
Most above ground pools come with instructions, but not so with replacement liners. We're working on this page to give the do-it-yourselfer a few pointers on how above ground liners are installed, because in some cases, an improperly fitted or incorrectly installed liner can cause the pool to collapse! Sometimes this can happen suddenly, and catastrophically. Other times, it is slow and almost cartoon-like. Either way, it is expensive! I haven't figured out exactly the right wording to thoroughly explain each installation method, but until I do, please feel free to call or e-mail us, we will help if we can. Also, we have manufacturers instruction PDF's available on this page:
About Us and Our Websites:
Years ago, we decided that, while we need to make a living, there is more to being in business than just profit. We decided that we would offer the highest quality products, and be diligent in seeing that the customer gets the most for their money by taking the time to do the job right. We won't retire (or even ever see) the Bahamas, but we will know that we have made an honest living through hard work. We can't always be the cheapest, but we will always strive to see that our customers get our best!
Our websites are designed to be user friendly, and this site will explain everything you need to know about purchasing and installing your new liner. Our other sites, linked under the heading of "Other General Topics" are to help you learn about other related things. Highlights of each topic are given on the home page, with links to more specific details. We hope that you find our sites very helpful, and, if you need a break, visit "Crazy Chester" for a silly joke and a subject-related tip!
By Popular Request:
I'll tell you a goofy joke and give you a tip on the current subject.
From the bottom of our hearts, we say Thank You to our customers for allowing us to provide the very best in American Made vinyl swimming pool liners at fair prices. Thanks to you, we are able to work directly with the best American liner manufacturers, for better pricing, speed, and accuracy. Thank you for buying American... Our country needs it.
Thank You for telling others about us, Thank You for writing reviews, and
Thank You for Choosing A-Pro!
A-Pro Services, Your pool and spa service company, offers Pool Repair Spa Repair Pool Service Spa Service Pool heaters, Pool liners, inground liners, in ground liners above ground liners, safety covers, spa parts, spa motors, spa controls spa diagnostics, pool equipment, pool pumps, spa pumps, pool motors, heaters, In the Oklahoma City Area, including Bethany, Edmond, El Reno, Mustang, Moore, Yukon, Warr Acres, and Metro OKC. zip codes include: 73003, 73008, 73013,73034, 73083, 73036, 73059, 73064, 73090,73099, 73064, 73101, 73102, 73103, 73104, 73105, 73106, 73107, 73108, 73109, 73110, 73111. 73112, 73113, 73114, 73115, 73116, 73117, 73118, 73119, 73120, 73121, 73122, 73123, 73124, 73125, 73126, 73127, 73128, 73129, 73130, 73131, 73132, 73134, 73135, 73136, 73137, 73139, 73140, 73141, 73142, 73143, 73144, 73145, 73146, 73147, 73148, 73149, 73150, 73151, 73152, 73153, 73154, 73155, 73156, 73157, 73159, 73160, 73162, 73163, 73164, 73165, 73167, 73169, 73170, 73172, 73173, 73178, 73179, 73184, 73185, 73189, 73190, 73194, 73195, 73196, 73197, 73198,
Oklahoma City and the OKC Area including Bethany, Edmond, Moore, Mustang, Norman, Yukon,
All About Pool Liners
A-Pro Services offers expert in ground pool liner installation in Oklahoma City and the OKC, area including Bethany, Edmond, More, Mustang, Norman, Yukon, OKC We ship replacement liners by American manufacturers throughout the United States.
This site is all about Swimming Pool Liners. Links above cover topics related to liners, followed by highlights of those topics. We also have links to our other websites related to swimming pool and spa repair and service. For more information about swimming pool liners, or other subjects, please contact us by e-mail or at the phone number above - we'll be more than happy to help with all your questions!
TopicsChoosing Your Liner