Crazy Chester Idjut
Crazy Chester Sez:

      Go ahead......

            Click me....

   I ain't Skeerd of You.....
"One Nation,
  Under God"
Waving Flag, United States of America
   Crazy Chester Sez:

Crazy Chester Idjut

I get the distinct  feeling that

 I have been clicked!

Let me make sure...  Do it again!


Now, Where The Heck Was I?





  Basics of Liners

 In-Ground Liners

 In-Ground Installation

 Choosing Your New Liner

 Choosing A Liner Installer

  Do I Need A New Liner?    

  Where do I start? 


   Our Reputation

    E-Mail Us

   ( More repair topics below )

More about liners

  Vinyl Liner Care

  Water Chemistry  

  Above Grnd Liners

  A.G. Installation


  Measuring  a Liner


  405) 603-1694




Other General Topics

(Our related sites) 

(A-Pro home)




PoolService OKC



 Quick Navigation


   Online Billpay

For in-ground vinyl swimming pool liner replacement and installation in the Oklahoma City area, we humbly invite you to choose A-Pro Services.  We'll take good care of you, with liners directly from America's best liner manufacturers. 

   Because it's not just any  liner...

           It's Your Liner!




Around Town

Pool Liner Installation in Edmond


Pool Liner Installation Mustang


Pool Liners in Yukon

"Moore" on the way! 

Pool Liners in Moore


  "When You Want it done right... 

                 Call A-Pro!"

   (405) 603-1694










Alright, Step On it!  Take me back to the

PoolLinerOKC website      [--.Mobi--]


Chester's Tip:

   Oh No... I was taking off the step trim, and a screw head is stripped out!

    No worries,

   Use a left-handed drill bit to get out a screw that has a stripped head. (Yes, they do exist, more rightly called a  left threaded, or reverse drill bit.)  The heat and friction will eventually cause it to grab and remove the screw.  If a hardware store isn't handy, you can use a hacksaw blade to cut a slot in the head to use a flat screwdriver.  It's not as easy, but it usually works.

   There is also a little kit that is made for this, and I haven't found anything that works better.  The principle is like the old fashioned Ease-Out.  These come in a kit with four sizes, each has a drill tip on one end, and the extractor on the other end.  The are operated with the drill in reverse.  The drill end is sized and shaped perfectly to give the extractor something to bite into.  I have seen these kits advertised on TV for $20 plus freight, and they send you a 2nd set for a separate fee.  I just go pick them up at harbor freight for around $4 per set!

   Sometimes, the head of the screw breaks off, (or you accidentally screw all the way through it).  Don't worry about it, once you are able to get the step trim off, you can remove the broken screw with vice grips.

If even that should fail, grind it off flush, and drill a new hole beside it in the step trim piece, and once you reinstall the step trim piece, use a very small drill bit to make a new pilot hole for the screw.





 "When You Want it done right... 

              Call A-Pro!"  

   (405) 603-1694






Crazy Chester Sez:

My friends all call me "Blister"......

'Cause I always show up after the work is done!

Welcome to:  Crazy Chester

Sponsored by:

 A-Pro Services

Your Pool and Spa Service Company

Oklahoma City, Oklahoma